Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today’s needs and tomorrow’s next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we’re living in and that we have the power to shape.

Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality.

Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward.

Role Summary

Own the end-to-end PCIe system design for an NVMe SSD product line across client laptops and enterprise servers, from PHY/MAC review through ASIC/SoC integration, PCIe SFR/register analysis, and firmware design guidelines for robust link training, link transitions, low-power behavior. This role sits at the intersection of PCIe spec compliance, NVMe behavior, FW architecture, platform interoperability, and power/performance tuning.

Key Responsibilities

· Own system-level PCIe Gen5/Gen6 architecture from an NVMe SSD endpoint perspective

· Define and review PCIe + NVMe integration across SSD products

· PHY + MAC IP review, integration requirements and constraints

· SoC/ASIC integration: clocks, resets, power domains, straps, lane mapping, sidebands

· PCIe SFR + FW guidelines: flow control, LTSSM observability, power states, error handling

· Link & low power transitions: DLRM, L1, L1SS, L0p, ASPM, clock-down, APST Coordination

· Bring-up + debug: enumeration, speed negotiation, width detection, stability, AER/error recovery

· Customer requirement tuning: latency/power, performance, reliability and consistency

· Provide deep expertise in PCIe configuration and extended capability registers, including:

o Link, power management, MSI/MSI-X, AER, BARs, L1SS

· Lead platform bring-up and debug:

o Enumeration, link training, speed negotiation, power states, error handling

· Act as the technical authority for cross-team and customer escalations

Detailed Responsibilities (End-to-End PCIe for NVMe SSD)

1. PHY/MAC IP Review (System Design Perspective)

· Understand criteria for PHY/MAC/controller IP:

o Gen5/Gen6 readiness, equalization capability, margining hooks, lane mapping flexibility

o SRNS/SRIS tolerance, clocking modes, power management support

o Observability: LTSSM state visibility, error counters, replay/NAK stats, equalization telemetry

· Review IP documents:

o Reset sequences, compliance features, link speed change support

o L1SS behavior, CLKREQ#/REFCLK control expectations

o AER robustness, surprise down handling, hot/warm reset behavior

· Specify platform-facing requirements:

o Retimer/redriver compatibility assumptions (backplane/adaptor/cables)

2. ASIC/SoC Integration Ownership

· Integrate PCIe subsystem with:

o Clocking: REFCLK handling, clock request gating, clock-down sequences

o Resets: PERST# behavior, internal resets, warm/hot resets, FLR support as applicable

o Power domains: retention strategies, wake sources, D-state coordination

o Sidebands: WAKE#, CLKREQ#, presence detect patterns (platform dependent)

· Define lane policy:

o x4 typical NVMe, lane reversal/polarity, width detection & recovery from degraded width

3. PCIe SFR / Register + FW Design Guidelines

· Define a clean SFR map that FW uses for:

o LTSSM control/observability (state, substate, timers, retries)

o Link speed/width control and status (negotiated vs target)

o Low-power triggers: ASPM enable/disable, L1SS policy, L0p policy (if implemented)

o Clock request & clock gating behavior (safe entry/exit rules)

o Error logging counters (replay, NAK, ECRC, timeout, malformed TLPs)

o Recovery controls: link disable/enable, retrain, directed speed change, error clear policy

· Provide FW runbooks:

o “What to do when”: training fails, width reduces, speed fallback, AER floods

o Safe sequencing across power modes and APST transitions

4. Link Bring-Up & Transitions (Sequence Ownership)

You’ll own/define the exact sequencing rules for:

· Enumeration readiness

o Ensure config space stability, BAR mapping correctness, MSI/MSI-X readiness timing

· Speed negotiation / Directed Speed Change

o When to allow Gen5/Gen4 fallback; policy for stability vs performance

· Width detection & recovery

o Handling degraded width events (x4 → x2) and reporting/telemetry

· Link power management

o ASPM policy and its constraints with NVMe latency targets

o L1 entry/exit triggers and guard timers

o L1 Substates (L1.1/L1.2) enablement conditions, wake sources, and clock requirements

o DLRM handling (as applicable to platform/system) with safe NVMe readiness on resume

o L0p (if supported) and interaction with performance bursts

· Clock down / clock request

o Define clock request gating conditions, and safe “no transactions in flight” criteria

· NVMe APST alignment

o Coordinate NVMe power states (APST) with PCIe L-states so you don’t create:

§ long resume latencies (client)

§ link instability under load (enterprise)

5. Platform Interoperability

· Own differences across laptop and server:

o Client: aggressive power policies, fast resume, frequent idle entry/exit, D3hot/cold patterns

o Enterprise: stable performance, high queue depth, error containment, hot-plug-ish behaviors on some platforms

· Validate across:

o Multiple root complexes, BIOS implementations, OS stacks

REQUIRED: 

• Masters in Embedded Sytems/ VLSI/MicroElectronics or Bachelors(B.E./B.Tech) in Electronics & Communications/Electricals & Electronics/Computer Science 
• 8-14 years of experience semiconductor Products systems design or architecture 
• Knowledge of C, C++/ System C, Python, GIT, GitHub, AGILE is highly valued 
• Proven ability to work as part of a global team in multiple geographies 
• Multi-disciplinary experience, including familiarity with Firmware, HW, and ASIC design 

PREFERRED: 

• Knowledge of PCIe Gen5/6 technology is an advantage 
• Hands on experience in NVMe spec 
• Previous experience with storage systems, protocols, and NAND flash – strong advantage 
• Previous experience with storage systems, protocols, and DDR DRAM – strong advantage 
• Basic understanding of SSD system level concepts 
• Experience in SoC architecture, power management and ASIC Registers understanding to interact with FW design. 
• Proficient in C, C++. Experience in SystemC/TLM is preferred 
• Previous patent filing – advantage SKILLS: 
• Capable of developing wide system view for complex embedded systems 
• Excellent interpersonal skills and Team Player 
• High level of integrity and commitment to quality and timeliness. 
• Experience in using various bench equipment such as oscilloscopes, logic analyzers and meters. 
• Understanding of Hardware Block Diagrams, Schematics 
• Understanding of ASIC Architecture document and programming guidelines 
• Understanding of Firmware implementation 
• Strong can-do attitude 

Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution.

Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at [email protected] to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.