SAMSUNG E&A is a specialized EPC company that provides comprehensive solutions across all areas of the plant industry. With strong pride for our pioneering role in the history of the Korean plant industry in the past 50 years, we successfully performed numerous projects around the world and grew into a globally competitive engineering company. We continuously expand our business across the engineering industry including Oil and Gas processing, Refinery, Petrochemical, Energy Transition, Environmental, Industrial and BIO areas. Based on our extensive experience, accumulated technologies and talented resources, we provide various services from the feasibility studies to engineering, procurement, construction, commissioning and O&M.

We are looking for candidates who embody creativity, commitment, and collaboration—professionals who thrive in an innovative environment, are dedicated to excellence, and excel in teamwork. 

Join us and be part of a dynamic team where ideas are valued, and collective success drives our future.

General Characteristics (Job Summary)

• Perform quality activities in accordance with quality management system established.
• Establish inspection and test plans and its record forms as per project requirements and international codes and standards.
• Carry out inspections on discipline responsible to determine whether work performed conforms to quality requirements, and recording its result.
• Ensure inspection status is controlled through efficient tools such as inspection matrix.
• Coordinate direct activities with the other discipline inspectors to maintain consistency and integrity in the overall construction.
• Inspection of piping, welding, painting and insulation activities and supports subcontractor to ensure quality and efficiency in accordance with project specification.
• Review Customer's technical specifications and Quality Assurance Plans, QC Procedures and NDE procedures assist with establishing acceptable working practices for construction activities.
• Verifying that adequate and valid welder approvals are available, and that only approved welders are used in production.

Roles and Responsibilities

• Managing and performing inspection of Welding discipline.
• Generate client Requests For Inspection (RFI) where required providing sufficient notice for hold, witness and inspection points.
• Prepare / Review the following Quality procedure documents submitted by the Subcontractors such are Inspection Test Plan (ITP), Material Approval Request (MAR).
• Prepare / Review / Approve the related inspection reports where inspection results are recorded.
• Controlling inspection status by using systematic tools such as inspection matrix.
• Setting and applying practical inspection process of particular discipline based on Project requirements and International Codes (providing ITP and managing Matrix)
• Control NCRs to be closed out within the due date and supporting to prepare Corrective Action Plan properly.
• Performing and coordinating inspection with client.
• Carry out QC Supervisor’s responsibility in their absence.
• Control quality violations through regular tool box talk with the construction team.
• Review and track material submittals required for Welding Definable Features of Work prior to Preparatory Meetings.
• Conduct Preparatory Meetings with Subcontractors related to Welding Definable Features of Work.
• Inspect incoming material deliveries by confirming specifications and compliance with approved submittals, conduct visual and measurement tests in conjunction with the onsite logistics team.
• Reject and facilitate the return of unacceptable materials.
• Ensure to apply lessons learnt and proper preventive action conducted.
• Prepare / Review / Witness of PQR, WPS and Procedure.
• Conduct and witness Welder Qualification tests, Procedure Qualification, Destructive test and verify Compliance with the codes and standards.
• Verify welding qualification and ensure that only qualified welders are used in production.
• Confirm welding consumables before starting welding (Electrodes, filler wires, inserts, gases, fluxes etc.).
• Monitor the heat treatment requirements (PRE HEAT TEMP, PWHT, etc.).

Work location is Fadhili, Saudi Arabia.

Key Requirement

• Aramco experience is needed.
• Additionally, with CBT Pass is preferred for QC inspector
• If you have SAP No. and pass the CBT, please mention it in your CV.

Education and Experience

• Inspector shall be a High School graduate, or higher; shall be fully conversant with applicable Industry Standards and Specifications; and shall perform a variety of inspection functions with minimal supervision.
• Overall Experience: 5 years
• Experience of Inspection Specialty : 3 years
• Experience of Contract Scope of Work : 2 years
• Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector, or COMPANY approved equivalent.
• Inspector shall have a demonstrated background and thorough knowledge of codes such as ASME B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620 and 650, AWS D1.1, required for the execution of the WORK.
• Where Nondestructive Testing (NDT) forms part of the WORK, and Inspector is required to review or ensure NDT programs and results, the candidate shall have been previously qualified and certified to a minimum ASNT Level II in the relevant method(s).
• When performing, reviewing or ensuring Nondestructive Testing in VT, MT, PT, RT or UT, the candidate shall be certified in the specific method(s). When performing, reviewing or ensuring Radiographic Testing Film Interpretation (RTFI), Inspector shall be certified in RTFI.

Knowledge

• Technical knowledge and familiarity with related international codes and standards in particular discipline.
• Able to check that suitable and appropriate inspection and test tools are used.
• Investigate and analyze nonconformities and observations and figuring out solutions.
• Capability of planning and controlling inspections for medium scale project (0.5~1.5 billion dollar).
• Construction management and engineering standards.
• Computer application ability (MS Word and MS Excel).
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Review quality inspection personnel qualifications and training requirements.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.

Job Specific Speciality

• ITP Study
• Prevention and solving inconsistency
• Pre-Inspection
• RFI Management
• Punch Clear Management
• Punch Clear Implementation
• Off plot
• Marine/Jetty
• Carbon black
• LNG Concrete Tank
• CSWIP 3.1
• ASNT Level-II RT,UT,MPT,DPT
• Construction Completion
• Pre- Commissioning Activities
• Plant Start-Up
• Operation
• Maintenance
• Final Handover
• Subcontractor's ITP AND WPS Review

Competencies

• Client Management
• Communication
• Work Proficiency
• Problem solving
• Documentation Control
• Technical Know-how
• Decision Making
• Reports preparation

Our benefits include

• Accommodation
• Transportation
• Flight Tickets
• Medical Insurance

Samsung E&A follows fair and merit-based recruitment practices. We do not charge any fees during the recruitment process.